Special tools

The system for moving heavy equipment on rails is indispensable for moving power transformers in substations, cars, locomotives, as well as construction and lifting equipment, etc., while installing, repairing and performing emergency repair and constr

UG600T – is designed for trenchless laying of pipelines under highways, railway embankments, in urban areas.

Designed for trenchless laying of different types of underground utilites (water, sewer, electric cable, etc.)

UGRM installations are simplified versions of installations for trenchless laying of large-diameter pipes under roads using the punching method

PSC stand tightener is designed for tension of PSC stand in prestressed concrete constructions, in seismic belt etc.

Allows to scrap outworn methods of adjustment of flanges of pipelines for replacing gaskets, blinding, replacement or revalving on the main oil and gas pipilines, heating stations, sanitary-engineering system.

Designed to display front or rear axles, during repair or maintenance of the vehicles.

Wedge jack - a compact, lightweight and easy-to-use spreader, used for alignment, alignment, precise installation of weights, when widening narrow openings.

Spring balancers are used on assembly lines, for hanging hand tools, welding gun, machine for sewing bags, measuring instruments, control panels, etc.

Mobile and stationary systems are designed to carry out work related to the pumping of liquids and conducting emergency operations in various conditions

Designed for extrusion pin that connects the stub axle with a beam front axle ZIL, MAZ, GAZ, KAMAZ and buses without the removal of the beam itself.

Hydraulic pressing-out tool is designed to withdraw catepillar band pins of harvesters and road building machines. Tool may be used as a press to remove details in pressure couplings.

SG...PN... models are designed to remove (press out) the crank pin (low big end) during repair and mounting work with rocker-machine models SK-6 and SK-8.

Designed to remove engine pulley of the rocker-machine models SK-6 and SK-8 with a capacity of up to 22.2 tons. Fixed position of the pickup device over the entire removal range.

Designed to remove the crank from the reducer shaft of the rocker-machine models SK-6 and SK-8 in the field conditions and in the workshop.

Oil injector is designed for dismantling of press fitted parts (bearings, plugs, tooth wheels, etc.) with hydraulic thrust device.

The installation is designed for static and dynamic testing of geophysical equipment for compression and stretching.

The system is intended for preliminary pressing of power transformer winding during repair work.
The system complies with the requirements and instructions for repair of transformers.

Designed for tensioning high-strength wire for reinforcing reinforced concrete beams, for the repair and modernization of bridge and hydraulic structures, to strengthen building structures.

The tool is designed for high-pressure injection of sealing pastes, lubricants and sealants into valves, to prevent and eliminate leaks of the transported product (gas, oil, water, ammonia and other industrial fluids), as well as lubricate the mating p

The unit is designed for longitudinal sliding of spans and bridge structures.