The engine must be connected to
the explosion-proof engine starter on the working site in accordance
with safety rules and regulations of the electrical code.
Basic models are equipped with vibration-proof gauge, safety valve,
pressure regulator. The hydraulic equipment is controlled by the “I”
series three-position manual distribution valve (model “GR-ЗIR-1”)
allowing for working stroke/pressure holding/idle stroke phases (lift
cylinders, hydraulic cylinders, pipe benders, etc.) Could be used with
any type of hydraulic equipment and tools, both single-acting and
double-acting. Additional equipment could be installed, like a
thermometer, wheels for transportation, folding handles for carrying by 2
to 4 staff members (available for stations with tanks of 40, 63, and
100 liters).
Since the station series VNER are supplied without
remote and automatic control electrical equipment, it is highly
recommended to connect a hydraulic tool with built-in valve to VNER
pump.
Additional options for explosion-proof
stations
1- Ekv Control cabinets
Control cabinets and
explosion-proof alarms of ShUS type are designed to control, distribute, and
commute electrical energy in the circuits of different purposes, alarm about
parameters and operation modes of these circuits and their protection in
explosion-hazardous areas of enterprises of coal, chemical, oil-refining, gas,
and other sectors of industry where, under the operation conditions, there is a
possibility of generation of explosion-hazardous mixtures of gases and vapors
with air of I, IIA, IIB, IIC categories and T1-T5 groups.
2- Puv Control stations
The stations are
designed for remote control over electric motor starting and control over
electrical hydraulic distributor magnets.
The stations are
designed for operation: with 2ExdIICT6 explosion proof mark – in
explosion-hazardous areas of productions, transport means, and storage of
products of chemical, oil-refining, gas and other sectors of industry.
3- Shv Cable plug/socket
Explosion-proof connectors are designed for quick connection and
disconnection of cabling sections, hydraulic stations with power sources in the
ground stationary and mobile electric installations with voltage up to 440 V DC
and AC frequency up to 60 Hz.
65fcdf9656ce5.png)
